机边粉碎机的操作方法 Operation Method
序号 No. | 操作项目 Operation Item | 操 作 内 容 Operation Content |
1 | 电源ON Power Supply ON | 将贵公司的设备电源开关指向 “ON” Please turn the switch of machine power supply to “ON” |
2 | 开始动转 Start Running | 按下启动按钮(绿色),设备运转。 Press start button (Green), machine starts running 当上、下体和料斗开启部分有异 常现象发生(如有异物),安全开关打开,设备停止运转。 1、When the starting part of upper and lower part, hopper is found to be abnormal (such as any foreign matters), safety switch turned on, machine stops running. 2、 当上、下体和料斗间的锁紧装置 松开时,机器就不能启动或当机器 震动时也会引起机器停止。 2、When the locking device between upper and lower part and hopper loosening, the machine cannot start up, the machine will stop when machine is vibrating. |
3 | 停止运转 Stop Running | 请按下停止按钮(红色),停止运转。 Press Stop button (red) to stop running. |
4 | 电源OFF Power Supply OFF | 请将贵公司的设备电源开关 “OFF” Please turn the switch of machine power supply to “OFF” 1、 最初,请将可弃物作为试投料投 入其中进行试运转。试运转后,必 须清扫粉碎机。 First, please put discarded material as feeding into the machine for pilot run. After the pilot run, clean up the pulverizer 2、 当粉碎机充分旋转后投入材料。 Put the material into pulverizer after the machine is fully rotating. 3、 请事先确认粉碎材料中没有混入 异物后,再投入材料。 Please confirm no foreign matter mixed in material before input material. 4、 停止运转时,请先确认粉碎机内 部的材料几乎完全排出后再关闭。 when machine stops running, confirm material inside the pulverizer has completely drained. |